Solderless Clip-on Coupler Connector  4pin RGB for 3528 5050 LED Strip Light

10mm 4pin for RGB led strip light

Connects Strip-Strip or Wires-Strip.
No soldering required.
Color White
Material: Plastic
Quantity: 10 PCS
Easy to use, LED strip or wire slides under the metal tabs inside the connector.

Module Converter Serial Adapter Cable F Win XP/7/8/8.1 PL2303TA USB TTL to RS232

• 100% brand new and high quality
• This is a newly designed product, using the Taiwan prolific production company PL2303TA chips, PL2303TA perfectly compatible with win XP/VISTA/7/8/8.1 system
• PL2303TA provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL2303TA highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready without having to rewrite the COM port software application.
• By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL2303TA is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports.When real RS232 signaling is not required, baud rate higher than 115200 bps could be used for even higher performance. The flexible baud rate generator of PL2303TA could be programmed to generate any rate between 75 bps and 6M bps.
• PL2303TA is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, PL2303TA is perfect for bus powered operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS232-like serial port side also allows PL2303TA to connect directly to any 3.3V~1.8V range devices.
• This product is designed for laboratory, product testing, low-cost MCU communications and other applications, there are four lead,
• Red +5 V
• Black GND
• White RXD
• Green TXD

       Applications:

• Single-chip upgrade solution for Legacy RS232 devices to USB interface
• USB to RS232 converters/cables/dongles
• Healthcare/Medical USB Interface Data Transfer Cable
• Personal Infotainment/Media Player Docking USB Interface
• Cellular/PDA USB Interface Data Transfer Cable
• Serial-over-IP Wireless Solution
• USB Barcode/Smart Card Readers
• GPS/Navigation USB Interface
• Point-of-Sale (POS) Terminals/Printers
• PC Docking Station/Port Replicators
• Industrial/Instrumentation/Automation Control USB Interface
• USB Modem/Wireless/Zigbee USB Interface
• Set-Top Box (STB) / Home Gateway USB Interface
• BatteryCharger Application
• MCU-based devices to USB interface
• Cable lenght:100cm(approx)
• Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

USB To RS232 TTL UART PL2303HX Auto Converter USB to COM Cable Adapter Module

Built-in TTL COM PC-PL2303HX Chip.

Standard USB type A male and TTL 4 pin connector

Simple and Easy way to give USB support to your designs

Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista Win 7

Black cable-----GND

Green cable-----TXD

White cable-----RXD

Red cable -------VCC

6Pin PL2303HXD USB to RS232 TTLCable module for win XP win 7 8 Android OTG

This is a newly designed product, using the Taiwan prolific production company PL2303HXD chips, PL2303HXD perfectly compatible with win XP/VISTA/7/8/8.1 / Android OTG

The PL-2303HXD is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HXD provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303HXD highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.

Full compliance with the USB Specification v1.1

Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps

Supports RS422/RS485 interface

Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection

This product is designed for laboratory, product testing, low-cost MCU communications and other applications, there are four lead,

Red +5 V

Black GND

White RXD

Green TXD

Yellow RTS

Blue CTS

Product Applications:

• Single-chip upgrade solution for Legacy RS232 devices to USB interface
• USB to RS232 converters/cables/dongles
• Healthcare/Medical USB Interface Data Transfer Cable
• Personal Infotainment/Media Player Docking USB Interface
• Cellular/PDA USB Interface Data Transfer Cable
• Serial-over-IP Wireless Solution
• USB Barcode/Smart Card Readers
• GPS/Navigation USB Interface
• Point-of-Sale (POS) Terminals/Printers
• PC Docking Station/Port Replicators
• Industrial/Instrumentation/Automation Control USB Interface
• USB Modem/Wireless/Zigbee USB Interface